diff --git a/bootstrap/helmrepositories/helmrepository-metallb.yaml b/bootstrap/helmrepositories/helmrepository-metallb.yaml
index 408ab14..2e537e9 100644
--- a/bootstrap/helmrepositories/helmrepository-metallb.yaml
+++ b/bootstrap/helmrepositories/helmrepository-metallb.yaml
@@ -2,8 +2,8 @@
 apiVersion: source.toolkit.fluxcd.io/v1beta1
 kind: HelmRepository
 metadata:
-  name: metallb
+  name: bitnami
   namespace: flux-system
 spec:
   interval: 15m
-  url: https://metallb.github.io/metallb
\ No newline at end of file
+  url: https://charts.bitnami.com/bitnami
diff --git a/bootstrap/kustomizations/kustomization-metallb.yaml b/bootstrap/kustomizations/kustomization-metallb.yaml
index 718c10b..1e4391e 100644
--- a/bootstrap/kustomizations/kustomization-metallb.yaml
+++ b/bootstrap/kustomizations/kustomization-metallb.yaml
@@ -16,4 +16,4 @@ spec:
     - apiVersion: apps/v1
       kind: Deployment
       name: metallb-controller
-      namespace: metallb-system
\ No newline at end of file
+      namespace: metallb-system
diff --git a/metallb-system/configmap-metallb-helm-chart-value-overrides.yaml b/metallb-system/configmap-metallb-helm-chart-value-overrides.yaml
index 679cbbe..43b535c 100644
--- a/metallb-system/configmap-metallb-helm-chart-value-overrides.yaml
+++ b/metallb-system/configmap-metallb-helm-chart-value-overrides.yaml
@@ -6,221 +6,342 @@ metadata:
   namespace: metallb-system
 data:
   values.yaml: |-
-    # Default values for metallb.
-    # This is a YAML-formatted file.
-    # Declare variables to be passed into your templates.
+    ## @section Global parameters
+    ## Global Docker image parameters
+    ## Please, note that this will override the image parameters, including dependencies, configured to     use the global value
+    ## Current available global Docker image parameters: imageRegistry, imagePullSecrets and    storageClass
 
-    imagePullSecrets: []
-    nameOverride: ""
-    fullnameOverride: ""
-
-    # To configure MetalLB, you must specify ONE of the following two
-    # options.
-
-    # existingConfigMap specifies the name of an externally-defined
-    # ConfigMap to use as the configuration. Helm will not manage the
-    # contents of this ConfigMap, it is your responsibility to create it.
-    existingConfigMap: "metallb-config"
-
-    # configInline specifies MetalLB's configuration directly, in yaml
-    # format. When configInline is used, Helm manages MetalLB's
-    # configuration ConfigMap as part of the release, and
-    # existingConfigMap is ignored.
-    #
-    # Refer to https://metallb.universe.tf/configuration/ for
-    # available options.
-    # configInline: {}
-
-    rbac:
-      # create specifies whether to install and use RBAC rules.
-      create: true
-
-    psp:
-      # create specifies whether to install and use Pod Security Policies.
-      create: true
-
-    prometheus:
-      # scrape annotations specifies whether to add Prometheus metric
-      # auto-collection annotations to pods. See
-      # https://github.com/prometheus/prometheus/blob/release-2.1/documentation/examples/   prometheus-kubernetes.yml
-      # for a corresponding Prometheus configuration. Alternatively, you
-      # may want to use the Prometheus Operator
-      # (https://github.com/coreos/prometheus-operator) for more powerful
-      # monitoring configuration. If you use the Prometheus operator, this
-      # can be left at false.
-      scrapeAnnotations: false
-
-      # port both controller and speaker will listen on for metrics
-      metricsPort: 7472
-
-      # the service account used by prometheus
-      # required when .Values.prometheus.podMonitor.enabled == true
-      serviceAccount: ""
-
-      # the namespace where prometheus is deployed
-      # required when .Values.prometheus.podMonitor.enabled == true
-      namespace: ""
-
-      # Prometheus Operator PodMonitors
-      podMonitor:
-
-        # enable support for Prometheus Operator
-        enabled: false
-
-        # optional additionnal labels for podMonitors
-        additionalLabels: {}
-
-        # Job label for scrape target
-        jobLabel: "app.kubernetes.io/name"
-
-        # Scrape interval. If not set, the Prometheus default scrape interval is used.
-        interval:
-
-        # 	metric relabel configs to apply to samples before ingestion.
-        metricRelabelings: []
-        # - action: keep
-        #   regex: 'kube_(daemonset|deployment|pod|namespace|node|statefulset).+'
-        #   sourceLabels: [__name__]
-
-        # 	relabel configs to apply to samples before ingestion.
-        relabelings: []
-        # - sourceLabels: [__meta_kubernetes_pod_node_name]
-        #   separator: ;
-        #   regex: ^(.*)$
-        #   target_label: nodename
-        #   replacement: $1
-        #   action: replace
-
-      # Prometheus Operator alertmanager alerts
-      prometheusRule:
-
-        # enable alertmanager alerts
-        enabled: false
-
-        # optional additionnal labels for prometheusRules
-        additionalLabels: {}
-
-        # MetalLBStaleConfig
-        staleConfig:
-          enabled: true
-          labels:
-            severity: warning
-
-        # MetalLBConfigNotLoaded
-        configNotLoaded:
-          enabled: true
-          labels:
-            severity: warning
-
-        # MetalLBAddressPoolExhausted
-        addressPoolExhausted:
-          enabled: true
-          labels:
-            severity: alert
-
-        addressPoolUsage:
-          enabled: true
-          thresholds:
-            - percent: 75
-              labels:
-                severity: warning
-            - percent: 85
-              labels:
-                severity: warning
-            - percent: 95
-              labels:
-                severity: alert
-
-        # MetalLBBGPSessionDown
-        bgpSessionDown:
-          enabled: true
-          labels:
-            severity: alert
-
-        extraAlerts: []
-
-    # controller contains configuration specific to the MetalLB cluster
-    # controller.
-    controller:
-      enabled: true
-      # -- Controller log level. Must be one of: `all`, `debug`, `info`, `warn`, `error` or `none`
-      logLevel: info
-      image:
-        repository: quay.io/metallb/controller
-        tag:
-        pullPolicy:
-      serviceAccount:
-        # Specifies whether a ServiceAccount should be created
-        create: true
-        # The name of the ServiceAccount to use. If not set and create is
-        # true, a name is generated using the fullname template
-        name: ""
-        annotations: {}
-      securityContext:
-        runAsNonRoot: true
-        # nobody
-        runAsUser: 65534
-        fsGroup: 65534
-      resources: {}
-        # limits:
-          # cpu: 100m
-          # memory: 100Mi
-      nodeSelector: {}
-      tolerations: []
-      priorityClassName: ""
-      affinity: {}
-      podAnnotations: {}
-      livenessProbe:
-        enabled: true
-        failureThreshold: 3
-        initialDelaySeconds: 10
-        periodSeconds: 10
-        successThreshold: 1
-        timeoutSeconds: 1
-      readinessProbe:
-        enabled: true
-        failureThreshold: 3
-        initialDelaySeconds: 10
-        periodSeconds: 10
-        successThreshold: 1
-        timeoutSeconds: 1
-
-    # speaker contains configuration specific to the MetalLB speaker
-    # daemonset.
-    speaker:
-      enabled: true
-      # -- Speaker log level. Must be one of: `all`, `debug`, `info`, `warn`, `error` or `none`
-      logLevel: info
-      tolerateMaster: true
-      memberlist:
-        enabled: true
-        mlBindPort: 7946
-      image:
-        repository: quay.io/metallb/speaker
-        tag:
-        pullPolicy:
-      serviceAccount:
-        # Specifies whether a ServiceAccount should be created
-        create: true
-        # The name of the ServiceAccount to use. If not set and create is
-        # true, a name is generated using the fullname template
-        name: ""
-        annotations: {}
-      ## Defines a secret name for the controller to generate a memberlist encryption secret
-      ## By default secretName: {{ "metallb.fullname" }}-memberlist
+    ## @param global.imageRegistry Global Docker image registry
+    ## @param global.imagePullSecrets Global Docker registry secret names as an array
+    ##
+    global:
+      imageRegistry: ""
+      ## E.g.
+      ## imagePullSecrets:
+      ##   - myRegistryKeySecretName
+      ##
+      imagePullSecrets: []
+
+    ## @section Common parameters
+
+    ## @param kubeVersion Force target Kubernetes version (using Helm capabilities if not set)
+    ##
+    kubeVersion: ""
+    ## @param nameOverride String to partially override metallb.fullname include (will maintain the     release name)
+    ##
+    nameOverride: ""
+    ## @param fullnameOverride String to fully override metallb.fullname template
+    ##
+    fullnameOverride: ""
+    ## @param commonLabels Add labels to all the deployed resources
+    ##
+    commonLabels: {}
+    ## @param commonAnnotations Add annotations to all the deployed resources
+    ##
+    commonAnnotations: {
+      configmap.reloader.stakater.com/reload: "metallb-config"
+    }
+    ## @param extraDeploy Array of extra objects to deploy with the release
+    ##
+    extraDeploy: []
+
+    ## Enable diagnostic mode in the deployment(s)/statefulset(s)
+    ##
+    diagnosticMode:
+      ## @param diagnosticMode.enabled Enable diagnostic mode (all probes will be disabled and the    command will be overridden)
+      ##
+      enabled: false
+      ## @param diagnosticMode.command Command to override all containers in the the deployment(s)/   statefulset(s)
+      ##
+      command:
+        - sleep
+      ## @param diagnosticMode.args Args to override all containers in the the deployment(s)/statefulset    (s)
+      ##
+      args:
+        - infinity
+    ## @section MetalLB parameters
+
+    ## RBAC creation for controller and speaker
+    ##
+    rbac:
+      ## @param rbac.create Specifies whether to install and use RBAC rules
+      ##
+      create: true
+    ## PSP creation for controller and speaker
+    ##
+    psp:
+      ## @param psp.create Whether to create a PodSecurityPolicy. WARNING: PodSecurityPolicy is     deprecated in Kubernetes v1.21 or later, unavailable in v1.25 or later
+      ##
+      create: false
+    ## Prometheus Operator alertmanager alerts
+    ##
+    networkPolicy:
+      ## @param networkPolicy.enabled Enable NetworkPolicy
+      ## Prometheus scraping of the controller
+      ##
+      enabled: false
+      ## @param networkPolicy.ingressNSMatchLabels Allow connections from other namespaces
+      ## Set label for namespace and pods (optional).
+      ##
+      ingressNSMatchLabels: {}
+      ## @param networkPolicy.ingressNSPodMatchLabels For other namespaces match by pod labels and    namespace labels
+      ##
+      ingressNSPodMatchLabels: {}
+    ## @param prometheusRule.enabled Prometheus Operator alertmanager alerts are created
+    ##
+    prometheusRule:
+      enabled: false
+
+    ## @section Controller parameters
+
+    ## Metallb Controller deployment.
+    ## ref: https://hub.docker.com/r/bitnami/metallb-controller/tags
+    ##
+    controller:
+      ## @param controller.image.registry MetalLB Controller image registry
+      ## @param controller.image.repository MetalLB Controller image repository
+      ## @param controller.image.tag MetalLB Controller  image tag (immutable tags are recommended)
+      ## @param controller.image.digest MetalLB Controller image digest in the way sha256:aa.... Please     note this parameter, if set, will override the tag
+      ## @param controller.image.pullPolicy MetalLB Controller image pull policy
+      ## @param controller.image.pullSecrets Specify docker-registry secret names as an array
+      ##
+      image:
+        registry: docker.io
+        repository: bitnami/metallb-controller
+        tag: 0.13.4-debian-11-r3
+        digest: ""
+        ## Specify a imagePullPolicy
+        ## Defaults to 'Always' if image tag is 'latest', else set to 'IfNotPresent'
+        ## ref: https://kubernetes.io/docs/user-guide/images/#pre-pulling-images
+        ##
+        pullPolicy: IfNotPresent
+        ## Optionally specify an array of imagePullSecrets.
+        ## Secrets must be manually created in the namespace.
+        ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
+        ## e.g:
+        ## pullSecrets:
+        ##   - myRegistryKeySecretName
+        ##
+        pullSecrets: []
+      ## @param controller.updateStrategy.type Metallb controller deployment strategy type.
+      ## ref: https://kubernetes.io/docs/concepts/workloads/controllers/deployment/#strategy
+      ## e.g:
+      ## updateStrategy:
+      ##  type: RollingUpdate
+      ##  rollingUpdate:
+      ##    maxSurge: 25%
+      ##    maxUnavailable: 25%
+      ##
+      updateStrategy:
+        type: RollingUpdate
+      ## @param controller.hostAliases Deployment pod host aliases
+      ## https://kubernetes.io/docs/concepts/services-networking/   add-entries-to-pod-etc-hosts-with-host-aliases/
+      ##
+      hostAliases: []
+      ## If global .Values.rbac.create is disabled no rbac is created.
+      ## This value is then meaningless
+      ## Defines if the controller rbac should be created.
+      ##
+      rbac:
+        ## @param controller.rbac.create create specifies whether to install and use RBAC rules.
+        ##
+        create: true
+      ## If global .Values.psp.create is disabled no psp is created.
+      ## This value is then meaningless
+      ## Defines if the controller psp should be created.
+      ##
+      psp:
+        ## @param controller.psp.create Whether to create a PodSecurityPolicy. WARNING:     PodSecurityPolicy is deprecated in Kubernetes v1.21 or later, unavailable in v1.25 or later
+        ##
+        create: true
+      ## @param controller.priorityClassName Metallb controller pods' priorityClassName
       ##
-      # secretName:
-      resources: {}
-        # limits:
-          # cpu: 100m
-          # memory: 100Mi
-      nodeSelector: {}
-      tolerations: []
       priorityClassName: ""
+      ## @param controller.schedulerName Name of the k8s scheduler (other than default)
+      ## ref: https://kubernetes.io/docs/tasks/administer-cluster/configure-multiple-schedulers/
+      ##
+      schedulerName: ""
+      ## @param controller.terminationGracePeriodSeconds In seconds, time the given to the Metallb    controller pod needs to terminate gracefully
+      ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod/#termination-of-pods
+      ##
+      terminationGracePeriodSeconds: 0
+      ## @param controller.topologySpreadConstraints Topology Spread Constraints for pod assignment
+      ## https://kubernetes.io/docs/concepts/workloads/pods/pod-topology-spread-constraints/
+      ## The value is evaluated as a template
+      ##
+      topologySpreadConstraints: []
+      ## Controller container resource requests and limits
+      ## ref: https://kubernetes.io/docs/user-guide/compute-resources/
+      ## We usually recommend not to specify default resources and to leave this as a conscious
+      ## choice for the user. This also increases chances charts run on environments with little
+      ## resources, such as Minikube. If you do want to specify resources, uncomment the following
+      ## lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+      ## @param controller.resources.limits The resources limits for the container
+      ## @param controller.resources.requests The requested resources for the container
+      ##
+      resources:
+        ## Example:
+        ## limits:
+        ##    cpu: 100m
+        ##    memory: 100Mi
+        limits: {}
+        ## Examples:
+        ## requests:
+        ##    cpu: 25m
+        ##    memory: 25Mi
+        requests: {}
+      ## @param controller.nodeSelector Node labels for controller pod assignment
+      ## ref: https://kubernetes.io/docs/user-guide/node-selection/
+      ##
+      nodeSelector: {}
+      ## @param controller.tolerations Tolerations for controller pod assignment
+      ## ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
+      ##
+      tolerations: []
+      ## @param controller.affinity Affinity for controller pod assignment
+      ## ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/    #affinity-and-anti-affinity
+      ##
       affinity: {}
-      ## Selects which runtime class will be used by the pod.
-      # runtimeClassName:
+      ## @param controller.podAnnotations Controller Pod annotations
+      ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
+      ##
       podAnnotations: {}
+      ## @param controller.podLabels Controller Pod labels
+      ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/
+      ##
+      podLabels: {}
+      ## @param controller.podAffinityPreset Controller Pod affinitypreset. Allowed values: soft, hard
+      ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/    #inter-pod-affinity-and-anti-affinity
+      ##
+      podAffinityPreset: ""
+      ## @param controller.podAntiAffinityPreset Controller Pod anti affinitypreset. Allowed values:    soft, hard
+      ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/    #inter-pod-affinity-and-anti-affinity
+      ##
+      podAntiAffinityPreset: soft
+      ## Node affinity preset
+      ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#node-affinity
+      ## Allowed values: soft, hard
+      ##
+      nodeAffinityPreset:
+        ## @param controller.nodeAffinityPreset.type Controller Pod Node affinity preset. Allowed     values: soft, hard
+        ##
+        type: ""
+        ## @param controller.nodeAffinityPreset.key Controller Pod Node affinity label key to match
+        ## E.g.
+        ## key: "kubernetes.io/e2e-az-name"
+        ##
+        key: ""
+        ## @param controller.nodeAffinityPreset.values Controller Pod Node affinity label values to     match
+        ## E.g.
+        ## values:
+        ##   - e2e-az1
+        ##   - e2e-az2
+        ##
+        values: []
+      ## Configure Pods Security Context
+      ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/    #set-the-security-context-for-a-pod
+      ## @param controller.podSecurityContext.enabled Enabled Metallb Controller pods' Security Context
+      ## @param controller.podSecurityContext.fsGroup Set Metallb Controller pod's Security Context     fsGroup
+      ##
+      podSecurityContext:
+        enabled: true
+        fsGroup: 1001
+      ## Configure Container Security Context
+      ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/    #set-the-security-context-for-a-pod
+      ## @param controller.containerSecurityContext.enabled Enabled Metallb Controller containers'    Security Context
+      ## @param controller.containerSecurityContext.runAsUser Set Metallb Controller containers'    Security Context runAsUser
+      ## @param controller.containerSecurityContext.runAsNonRoot Set Metallb Controller container's     Security Context runAsNonRoot
+      ## @param controller.containerSecurityContext.allowPrivilegeEscalation Enables privilege    Escalation context for the pod.
+      ## @param controller.containerSecurityContext.readOnlyRootFilesystem Allows the pod to mount the    RootFS as ReadOnly
+      ## @param controller.containerSecurityContext.capabilities.drop [array] Drop capabilities for the     securityContext
+      ##
+      containerSecurityContext:
+        enabled: true
+        runAsUser: 1001
+        runAsNonRoot: true
+        allowPrivilegeEscalation: false
+        readOnlyRootFilesystem: true
+        capabilities:
+          drop:
+            - ALL
+      ## @param controller.command Override default container command (useful when using custom images)
+      ##
+      command: []
+      ## @param controller.args Override default container args (useful when using custom images)
+      ##
+      args: []
+      ## @param controller.lifecycleHooks for the Metallb Controller container(s) to automate     configuration before or after startup
+      ##
+      lifecycleHooks: {}
+      ## @param controller.extraEnvVars Extra environment variable to pass to the running container.
+      ## For example:
+      ## extraEnvVars:
+      ##  - name: MY_ENV_VAR
+      ##    value: env_var_value
+      ##
+      extraEnvVars: []
+      ## @param controller.extraEnvVarsCM Name of existing ConfigMap containing extra env vars for    Metallb controller nodes
+      ##
+      extraEnvVarsCM: "metallb-config"
+      ## @param controller.extraEnvVarsSecret Name of existing Secret containing extra env vars for     Metallb controller nodes
+      ##
+      extraEnvVarsSecret: ""
+      ## @param controller.extraVolumes Optionally specify extra list of additional volumes for the     Metallb controller pod(s)
+      ##
+      extraVolumes: []
+      ## @param controller.extraVolumeMounts Optionally specify extra list of additional volumeMounts     for the Metallb controller container(s)
+      ##
+      extraVolumeMounts: []
+      ## @param controller.sidecars Add additional sidecar containers to the Metallb Controller pod(s)
+      ## e.g:
+      ## sidecars:
+      ##   - name: your-image-name
+      ##     image: your-image
+      ##     imagePullPolicy: Always
+      ##     ports:
+      ##       - name: portname
+      ##         containerPort: 1234
+      ##
+      sidecars: []
+      ## @param controller.initContainers Add additional init containers to the Metallb Controller pod    (s)
+      ## ref: https://kubernetes.io/docs/concepts/workloads/pods/init-containers/
+      ## e.g:
+      ## initContainers:
+      ##  - name: your-image-name
+      ##    image: your-image
+      ##    imagePullPolicy: Always
+      ##    command: ['sh', '-c', 'echo "hello world"']
+      ##
+      initContainers: []
+      ## Pods Service Account
+      ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/
+      ## @param controller.serviceAccount.create Specifies whether a ServiceAccount should be created
+      ## @param controller.serviceAccount.name Name of the service account to use. If not set and     create is true, a name is generated using the fullname template.
+      ## @param controller.serviceAccount.automountServiceAccountToken Automount service account token    for the server service account
+      ## @param controller.serviceAccount.annotations Annotations for service account. Evaluated as a     template. Only used if `create` is `true`.
+      ##
+      serviceAccount:
+        create: true
+        name: ""
+        automountServiceAccountToken: true
+        annotations: {}
+      ## @param controller.revisionHistoryLimit Configure the revisionHistoryLimit of the Controller    deployment
+      ## ref: https://kubernetes.io/docs/concepts/workloads/controllers/deployment/   #revision-history-limit
+      ##
+      revisionHistoryLimit: 3
+      ## @param controller.containerPorts.metrics Configures the ports the MetalLB Controller listens     on for metrics
+      ##
+      containerPorts:
+        metrics: 7472
+      ## Liveness probe values
+      ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#container-probes
+      ## @param controller.livenessProbe.enabled Enable livenessProbe
+      ## @param controller.livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe
+      ## @param controller.livenessProbe.periodSeconds Period seconds for livenessProbe
+      ## @param controller.livenessProbe.timeoutSeconds Timeout seconds for livenessProbe
+      ## @param controller.livenessProbe.failureThreshold Failure threshold for livenessProbe
+      ## @param controller.livenessProbe.successThreshold Success threshold for livenessProbe
+      ##
       livenessProbe:
         enabled: true
         failureThreshold: 3
@@ -228,6 +349,15 @@ data:
         periodSeconds: 10
         successThreshold: 1
         timeoutSeconds: 1
+      ## Readiness probe values
+      ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#container-probes
+      ## @param controller.readinessProbe.enabled Enable readinessProbe
+      ## @param controller.readinessProbe.initialDelaySeconds Initial delay seconds for readinessProbe
+      ## @param controller.readinessProbe.periodSeconds Period seconds for readinessProbe
+      ## @param controller.readinessProbe.timeoutSeconds Timeout seconds for readinessProbe
+      ## @param controller.readinessProbe.failureThreshold Failure threshold for readinessProbe
+      ## @param controller.readinessProbe.successThreshold Success threshold for readinessProbe
+      ##
       readinessProbe:
         enabled: true
         failureThreshold: 3
@@ -235,15 +365,441 @@ data:
         periodSeconds: 10
         successThreshold: 1
         timeoutSeconds: 1
-      # frr contains configuration specific to the MetalLB FRR container,
-      # for speaker running alongside FRR.
-      frr:
+      ## Startup probe values
+      ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#container-probes
+      ## @param controller.startupProbe.enabled Enable startupProbe
+      ## @param controller.startupProbe.initialDelaySeconds Initial delay seconds for startupProbe
+      ## @param controller.startupProbe.periodSeconds Period seconds for startupProbe
+      ## @param controller.startupProbe.timeoutSeconds Timeout seconds for startupProbe
+      ## @param controller.startupProbe.failureThreshold Failure threshold for startupProbe
+      ## @param controller.startupProbe.successThreshold Success threshold for startupProbe
+      ##
+      startupProbe:
+        enabled: false
+        failureThreshold: 3
+        initialDelaySeconds: 10
+        periodSeconds: 10
+        successThreshold: 1
+        timeoutSeconds: 1
+      ## @param controller.customStartupProbe Custom liveness probe for the Web component
+      ##
+      customStartupProbe: {}
+      ## @param controller.customLivenessProbe Custom liveness probe for the Web component
+      ##
+      customLivenessProbe: {}
+      ## @param controller.customReadinessProbe Custom readiness probe for the Web component
+      ##
+      customReadinessProbe: {}
+
+      ## @section Metallb controller Prometheus metrics export
+      ##
+      metrics:
+        ## @param controller.metrics.enabled Enable the export of Prometheus metrics
+        ##
+        enabled: false
+        ## Prometheus Exporter service parameters
+        ##
+        service:
+          ## @param controller.metrics.service.port Prometheus metrics service port
+          ##
+          port: 7472
+          ## @param controller.metrics.service.annotations [object] Annotations for the Prometheus    Exporter service service
+          ##
+          annotations:
+            prometheus.io/scrape: "true"
+            prometheus.io/port: "7472"
+            prometheus.io/path: "/metrics"    ## Prometheus Operator service monitors
+        ##
+        serviceMonitor:
+          ## @param controller.metrics.serviceMonitor.enabled Specify if a servicemonitor will be     deployed for prometheus-operator
+          ##
+          enabled: false
+          ## @param controller.metrics.serviceMonitor.namespace Namespace which Prometheus is running in
+          ## e.g:
+          ## namespace: monitoring
+          ##
+          namespace: ""
+          ## @param controller.metrics.serviceMonitor.jobLabel Specify the jobLabel to use for the    prometheus-operator
+          ##
+          jobLabel: "app.kubernetes.io/name"
+          ## @param controller.metrics.serviceMonitor.interval Scrape interval. If not set, the     Prometheus default scrape interval is used
+          ##
+          interval: ""
+          ## @param controller.metrics.serviceMonitor.scrapeTimeout Timeout after which the scrape is     ended
+          ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.    md#endpoint
+          ##
+          scrapeTimeout: ""
+          ## @param controller.metrics.serviceMonitor.metricRelabelings Specify additional relabeling     of metrics
+          ##
+          metricRelabelings: []
+          ## @param controller.metrics.serviceMonitor.relabelings Specify general relabeling
+          ##
+          relabelings: []
+          ## @param controller.metrics.serviceMonitor.selector ServiceMonitor selector labels
+          ## ref: https://github.com/bitnami/charts/tree/master/bitnami/    prometheus-operator#prometheus-configuration
+          ##
+          ## selector:
+          ##   prometheus: my-prometheus
+          ##
+          selector: {}
+          ## @param controller.metrics.serviceMonitor.labels Extra labels for the ServiceMonitor
+          ##
+          labels: {}
+          ## @param controller.metrics.serviceMonitor.honorLabels honorLabels chooses the metric's    labels on collisions with target labels
+          ##
+          honorLabels: false
+
+    ## @section Speaker parameters
+
+    ## Metallb Speaker daemonset.
+    ## ref: https://hub.docker.com/r/bitnami/metallb-speaker/tags
+    ##
+    speaker:
+      ## @param speaker.image.registry MetalLB Speaker image registry
+      ## @param speaker.image.repository MetalLB Speaker image repository
+      ## @param speaker.image.tag MetalLB Speaker  image tag (immutable tags are recommended)
+      ## @param speaker.image.digest MetalLB Speaker image digest in the way sha256:aa.... Please note    this parameter, if set, will override the tag
+      ## @param speaker.image.pullPolicy MetalLB Speaker image pull policy
+      ## @param speaker.image.pullSecrets Specify docker-registry secret names as an array
+      ##
+      image:
+        registry: docker.io
+        repository: bitnami/metallb-speaker
+        tag: 0.13.4-debian-11-r7
+        digest: ""
+        ## Specify a imagePullPolicy
+        ## Defaults to 'Always' if image tag is 'latest', else set to 'IfNotPresent'
+        ## ref: https://kubernetes.io/docs/user-guide/images/#pre-pulling-images
+        ##
+        pullPolicy: IfNotPresent
+        ## Optionally specify an array of imagePullSecrets.
+        ## Secrets must be manually created in the namespace.
+        ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
+        ## e.g:
+        ## pullSecrets:
+        ##   - myRegistryKeySecretName
+        ##
+        pullSecrets: []
+      ## @param speaker.updateStrategy.type Speaker daemonset strategy type
+      ## ref: https://kubernetes.io/docs/tasks/manage-daemon/update-daemon-set/
+      ##
+      updateStrategy:
+        ## StrategyType
+        ## Can be set to RollingUpdate or OnDelete
+        ##
+        type: RollingUpdate
+      ## If global .Values.rbac.create is disabled no rbac is created.
+      ## This value is then meaningless
+      ## Defines if the speaker rbac should be created.
+      ##
+      rbac:
+        ## @param speaker.rbac.create create specifies whether to install and use RBAC rules.
+        ##
+        create: true
+      ## @param speaker.hostAliases Deployment pod host aliases
+      ## https://kubernetes.io/docs/concepts/services-networking/   add-entries-to-pod-etc-hosts-with-host-aliases/
+      ##
+      hostAliases: []
+      ## If global .Values.psp.create is disabled no psp is created.
+      ## This value is then meaningless
+      ## Defines if the speaker psp should be created.
+      ##
+      psp:
+        ## @param speaker.psp.create Whether to create a PodSecurityPolicy. WARNING: PodSecurityPolicy    is deprecated in Kubernetes v1.21 or later, unavailable in v1.25 or later
+        ##
+        create: true
+      ## @param speaker.priorityClassName Speaker pods' priorityClassName
+      ##
+      priorityClassName: ""
+      ## @param speaker.terminationGracePeriodSeconds In seconds, time the given to the Speaker pod     needs to terminate gracefully
+      ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod/#termination-of-pods
+      ##
+      terminationGracePeriodSeconds: 2
+      ## Speaker container resource requests and limits
+      ## ref: https://kubernetes.io/docs/user-guide/compute-resources/
+      ## We usually recommend not to specify default resources and to leave this as a conscious
+      ## choice for the user. This also increases chances charts run on environments with little
+      ## resources, such as Minikube. If you do want to specify resources, uncomment the following
+      ## lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+      ## @param speaker.resources.limits The resources limits for the container
+      ## @param speaker.resources.requests The requested resources for the container
+      ##
+      resources:
+        ## Example:
+        ## limits:
+        ##    cpu: 100m
+        ##    memory: 100Mi
+        limits: {}
+        ## Examples:
+        ## requests:
+        ##    cpu: 25m
+        ##    memory: 25Mi
+        requests: {}
+      ## @param speaker.nodeSelector Node labels for speaker pod assignment
+      ## ref: https://kubernetes.io/docs/user-guide/node-selection/
+      ##
+      nodeSelector: {}
+      ## @param speaker.tolerations Tolerations for speaker pod assignment
+      ## ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
+      ##
+      tolerations: []
+      ## @param speaker.affinity Affinity for speaker pod assignment
+      ## ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/    #affinity-and-anti-affinity
+      ##
+      affinity: {}
+      ## Node speaker.affinity preset
+      ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#node-affinity
+      ##
+      nodeAffinityPreset:
+        ## @param speaker.nodeAffinityPreset.type Node affinity preset type. Ignored if `speaker.   affinity` is set. Allowed values: `soft` or `hard`
+        ##
+        type: ""
+        ## @param speaker.nodeAffinityPreset.key Node label key to match. Ignored if `speaker.affinity`     is set
+        ##
+        key: ""
+        ## @param speaker.nodeAffinityPreset.values Node label values to match. Ignored if `speaker.    affinity` is set
+        ## E.g.
+        ## values:
+        ##   - e2e-az1
+        ##   - e2e-az2
+        ##
+        values: []
+      ## @param speaker.podAffinityPreset Pod affinity preset. Ignored if `speaker.affinity` is set.    Allowed values: `soft` or `hard`
+      ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/    #inter-pod-affinity-and-anti-affinity
+      ##
+      podAffinityPreset: ""
+      ## @param speaker.podAntiAffinityPreset Pod anti-affinity preset. Ignored if `speaker.affinity`     is set. Allowed values: `soft` or `hard`
+      ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/    #inter-pod-affinity-and-anti-affinity
+      ##
+      podAntiAffinityPreset: soft
+      ## @param speaker.podAnnotations Speaker Pod annotations
+      ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
+      ##
+      podAnnotations: {}
+      ## @param speaker.podLabels Speaker Pod labels
+      ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/
+      ##
+      podLabels: {}
+      ## Configure Pods Security Context
+      ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/    #set-the-security-context-for-a-pod
+      ## @param speaker.podSecurityContext.enabled Enabled Speaker pods' Security Context
+      ## @param speaker.podSecurityContext.fsGroup Set Speaker pod's Security Context fsGroup
+      ##
+      podSecurityContext:
         enabled: true
-        # FRR_LOGGING_LEVEL used to set logging level for all running frr processes.
-        # Possible settings are :-
-        #  informational, warning, errors and debugging.
-        logLevel: informational
-        image:
-          repository: quay.io/frrouting/frr
-          tag: stable_7.5
-          pullPolicy:
\ No newline at end of file
+        fsGroup: 0
+      ## Configure Container Security Context
+      ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/    #set-the-security-context-for-a-pod
+      ## @param speaker.containerSecurityContext.enabled Enabled Speaker containers' Security Context
+      ## @param speaker.containerSecurityContext.runAsUser Set Speaker containers' Security Context     runAsUser
+      ## @param speaker.containerSecurityContext.allowPrivilegeEscalation Enables privilege Escalation    context for the pod.
+      ## @param speaker.containerSecurityContext.readOnlyRootFilesystem Allows the pod to mount the     RootFS as ReadOnly
+      ## @param speaker.containerSecurityContext.capabilities.drop [array] Drop capabilities for the    securityContext
+      ## @param speaker.containerSecurityContext.capabilities.add [array] Add capabilities for the    securityContext
+      ##
+
+      containerSecurityContext:
+        enabled: true
+        runAsUser: 0
+        allowPrivilegeEscalation: false
+        readOnlyRootFilesystem: true
+        capabilities:
+          drop:
+            - ALL
+          add:
+            - NET_ADMIN
+            - NET_RAW
+            - SYS_ADMIN
+      ## @param speaker.command Override default container command (useful when using custom images)
+      ##
+      command: []
+      ## @param speaker.args Override default container args (useful when using custom images)
+      ##
+      args: []
+      ## @param speaker.lifecycleHooks for the Speaker container(s) to automate configuration before or     after startup
+      ##
+      lifecycleHooks: {}
+      ## @param speaker.sidecars Add additional sidecar containers to the Speaker pod(s)
+      ## e.g:
+      ## sidecars:
+      ##   - name: your-image-name
+      ##     image: your-image
+      ##     imagePullPolicy: Always
+      ##     ports:
+      ##       - name: portname
+      ##         containerPort: 1234
+      ##
+      sidecars: []
+      ## @param speaker.initContainers Add additional init containers to the Speaker pod(s)
+      ## ref: https://kubernetes.io/docs/concepts/workloads/pods/init-containers/
+      ## e.g:
+      ## initContainers:
+      ##  - name: your-image-name
+      ##    image: your-image
+      ##    imagePullPolicy: Always
+      ##    command: ['sh', '-c', 'echo "hello world"']
+      ##
+      initContainers: []
+      ## Pods Service Account
+      ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/
+      ## @param speaker.serviceAccount.create Specifies whether a ServiceAccount should be created
+      ## @param speaker.serviceAccount.name Name of the service account to use. If not set and create     is true, a name is generated using the fullname template.
+      ## @param speaker.serviceAccount.automountServiceAccountToken Automount service account token for     the server service account
+      ## @param speaker.serviceAccount.annotations Annotations for service account. Evaluated as a    template. Only used if `create` is `true`.
+      ##
+      serviceAccount:
+        create: true
+        name: ""
+        automountServiceAccountToken: true
+        annotations: {}
+      ## Defines a secret to use outside of the auto generate
+      ## @param speaker.secretName References a Secret name for the member secret outside of the helm     chart
+      ## @param speaker.secretKey References a Secret key the member secret outside of the helm chart
+      ## @param speaker.secretValue Custom value for `speaker.secretKey`
+      ## Default: {{ randAlphaNum 256 | b64enc | quote }}
+      ## The auto generated secret has:
+      ## secretName: {{ "common.names.fullname" }}-memberlist
+      ## secretKey: secretkey
+      ## secretValue: random 256 character alphanumeric string
+      ##
+      secretName: ""
+      secretKey: ""
+      secretValue: ""
+      ## @param speaker.extraEnvVars Extra environment variable to pass to the running container.
+      ## For example:
+      ## extraEnvVars:
+      ##  - name: MY_ENV_VAR
+      ##    value: env_var_value
+      ##
+      extraEnvVars: []
+      ## @param speaker.extraEnvVarsCM Name of existing ConfigMap containing extra env vars for Speaker     nodes
+      ##
+      extraEnvVarsCM: ""
+      ## @param speaker.extraEnvVarsSecret Name of existing Secret containing extra env vars for    Speaker nodes
+      ##
+      extraEnvVarsSecret: ""
+      ## @param speaker.extraVolumes Optionally specify extra list of additional volumes for the    Speaker pod(s)
+      ##
+      extraVolumes: []
+      ## @param speaker.extraVolumeMounts Optionally specify extra list of additional volumeMounts for    the Speaker container(s)
+      ##
+      extraVolumeMounts: []
+      ## @param speaker.containerPorts.metrics HTTP Metrics Endpoint
+      ##
+      containerPorts:
+        metrics: 7472
+      ## Liveness probe values
+      ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#container-probes
+      ## @param speaker.livenessProbe.enabled Enable livenessProbe
+      ## @param speaker.livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe
+      ## @param speaker.livenessProbe.periodSeconds Period seconds for livenessProbe
+      ## @param speaker.livenessProbe.timeoutSeconds Timeout seconds for livenessProbe
+      ## @param speaker.livenessProbe.failureThreshold Failure threshold for livenessProbe
+      ## @param speaker.livenessProbe.successThreshold Success threshold for livenessProbe
+      ##
+      livenessProbe:
+        enabled: true
+        failureThreshold: 3
+        initialDelaySeconds: 10
+        periodSeconds: 10
+        successThreshold: 1
+        timeoutSeconds: 1
+      ## Readiness probe values
+      ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#container-probes
+      ## @param speaker.readinessProbe.enabled Enable readinessProbe
+      ## @param speaker.readinessProbe.initialDelaySeconds Initial delay seconds for readinessProbe
+      ## @param speaker.readinessProbe.periodSeconds Period seconds for readinessProbe
+      ## @param speaker.readinessProbe.timeoutSeconds Timeout seconds for readinessProbe
+      ## @param speaker.readinessProbe.failureThreshold Failure threshold for readinessProbe
+      ## @param speaker.readinessProbe.successThreshold Success threshold for readinessProbe
+      ##
+      readinessProbe:
+        enabled: true
+        failureThreshold: 3
+        initialDelaySeconds: 10
+        periodSeconds: 10
+        successThreshold: 1
+        timeoutSeconds: 1
+      ## Startup probe values
+      ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#container-probes
+      ## @param speaker.startupProbe.enabled Enable startupProbe
+      ## @param speaker.startupProbe.initialDelaySeconds Initial delay seconds for startupProbe
+      ## @param speaker.startupProbe.periodSeconds Period seconds for startupProbe
+      ## @param speaker.startupProbe.timeoutSeconds Timeout seconds for startupProbe
+      ## @param speaker.startupProbe.failureThreshold Failure threshold for startupProbe
+      ## @param speaker.startupProbe.successThreshold Success threshold for startupProbe
+      ##
+      startupProbe:
+        enabled: false
+        failureThreshold: 3
+        initialDelaySeconds: 10
+        periodSeconds: 10
+        successThreshold: 1
+        timeoutSeconds: 1
+      ## @param speaker.customStartupProbe Custom liveness probe for the Web component
+      ##
+      customStartupProbe: {}
+      ## @param speaker.customLivenessProbe Custom liveness probe for the Web component
+      ##
+      customLivenessProbe: {}
+      ## @param speaker.customReadinessProbe Custom readiness probe for the Web component
+      ##
+      customReadinessProbe: {}
+
+      ## @section Speaker Prometheus metrics export
+      metrics:
+        ## @param speaker.metrics.enabled Enable the export of Prometheus metrics
+        ##
+        enabled: false
+        ## Prometheus Exporter service parameters
+        ##
+        service:
+          ## @param speaker.metrics.service.port Prometheus metrics service port
+          ##
+          port: 7472
+          ## @param speaker.metrics.service.annotations [object] Annotations for the Prometheus     Exporter service service
+          ##
+          annotations:
+            prometheus.io/scrape: "true"
+            prometheus.io/port: "7472"
+            prometheus.io/path: "/metrics"
+        ## Prometheus Operator service monitors
+        ##
+        serviceMonitor:
+          ## @param speaker.metrics.serviceMonitor.enabled Enable support for Prometheus Operator
+          ##
+          enabled: false
+          ## @param speaker.metrics.serviceMonitor.namespace Namespace which Prometheus is running in
+          ## e.g:
+          ## namespace: monitoring
+          ##
+          namespace: ""
+          ## @param speaker.metrics.serviceMonitor.jobLabel Job label for scrape target
+          ##
+          jobLabel: "app.kubernetes.io/name"
+          ## @param speaker.metrics.serviceMonitor.interval Scrape interval. If not set, the Prometheus     default scrape interval is used
+          ##
+          interval: ""
+          ## @param speaker.metrics.serviceMonitor.scrapeTimeout Timeout after which the scrape is ended
+          ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.    md#endpoint
+          ##
+          scrapeTimeout: ""
+          ## @param speaker.metrics.serviceMonitor.metricRelabelings Specify additional relabeling of     metrics
+          ##
+          metricRelabelings: []
+          ## @param speaker.metrics.serviceMonitor.relabelings Specify general relabeling
+          ##
+          relabelings: []
+          ## @param speaker.metrics.serviceMonitor.selector ServiceMonitor selector labels
+          ## ref: https://github.com/bitnami/charts/tree/master/bitnami/    prometheus-operator#prometheus-configuration
+          ##
+          ## selector:
+          ##   prometheus: my-prometheus
+          ##
+          selector: {}
+          ## @param speaker.metrics.serviceMonitor.labels Extra labels for the ServiceMonitor
+          ##
+          labels: {}
+          ## @param speaker.metrics.serviceMonitor.honorLabels honorLabels chooses the metric's labels    on collisions with target labels
+          ##
+          honorLabels: false
\ No newline at end of file
diff --git a/metallb-system/helmrelease-metallb.yaml b/metallb-system/helmrelease-metallb.yaml
index b75ec58..7ecda8a 100644
--- a/metallb-system/helmrelease-metallb.yaml
+++ b/metallb-system/helmrelease-metallb.yaml
@@ -7,10 +7,10 @@ spec:
   chart:
     spec:
       chart: metallb
-      version: 0.11.0
+      version: 2.x
       sourceRef:
         kind: HelmRepository
-        name: metallb
+        name: bitnami
         namespace: flux-system
   interval: 15m
   timeout: 5m